Welmac  UK  Ltd
Welbourn
Lincoln,  LN5 0QL
Tel:  01400 272475      Mob:  0796 108 9170
Email:  welmacuk@btconnect.com

 

1155

[ Commercial Tub Grinder ]
with Grapple Loader
 
 
7000 series "Grapple Loader" with 29 foot reach
Efficient one man operation
Fast easy transport between jobs
Scale for weighing hay (optional)
540 h.p. (403 kw) Cat C15 Electronic Diesel Engine
Enclosed engine compartment with self-cleaning air intake system
30" wide by 26' long stacking conveyor
36" belly belt
 
         
   

The Grapple Loader cab raises 4 feet for an obstructed view and rotates through 270° along with the boom. All the controls for the grinder
are in the loader cab, as well as on the main control panel. Hydraulic outrigger legs are fitted for increased stability. An optional scale on
the grapple weighs individual bales.
         
   
The 36" wide belly belt feeding the
30' stacking conveyor. 		  Enclosed engine compartment with
rotary screen protects the engine from
debris build-up and reduces the noise
level. Easy access to the engine.		   Powered by a 475Hp or 540Hp C15 Tier 3
Caterpillar engine with state-of-the-art
electronic fuel injection. Offers good cold-
weather starting and good reliability.
         
   
The 11ft wide x 50" deep tilt tub
opens a full 90° for access to the
hammermill and screens and for
normal servicing.		   The Big Bite hammermill is located at the
rear of the sub frame. It is dynamically
balanced to give smoother operation, a
longer life and less maintenance.		   The electronic governor keeps the engine
RPMs constant, resulting in increased
efficiencies and constant load.
         
     
 
     
   
     

SPECIFICATIONS
     
  HAMMERMILL
  Length 50" (127cm)
  Diameter 26" (66cm)
  Feed Opening 25" x 52" (63.5 x 133cm)
  Hammers ½" (12.7mm) thick,AB hardened,swing
  Number of Hammers 88
  Hammer Rods 1¼" (31.75mm) dia, case hardened
  Mill Plates ½" thick x 16" (12.7mm x 40.64cm)
  Mill Shaft 4½" (114.3mm) stress proof steel
  Bearings 4" (101.6mm) pillow block
  Drive Direct from fluid coupling
  Screens ⅛" to ¼" thick, ⅛" to 8" hole sizes
  Screen Area 2781 sq in (7063 sq cm)
  ENGINE
  Type CAT Model C15 Tier 3
  Power Rating 475hp (354kW) or 540hp (403kw)
  Displacement 923 cu in (15.2 ltr)
  Fuel System Electronic fuel injection
  OTHER SPEC.
  Weight 34,100 lbs (15,468 kg)
  Axle 27,900 lbs (12,656 kg)
  Tongue 6,200 lbs (2,813 kg)
  TRANSPORT DIMENSIONS
  Width 11' (3.35m)
  Length 41' (12.5m)
  Height 11' 6" (3.51m)
 
  BELLY CONVEYOR
  Type Rubber belt with ¾" (19.05mm) cleats
  Width 36" (91.4cm)
  DISCHARGE CONVEYOR
  Width 30" (76.2cm)
  Length 26' (7.92m)
  Discharge Height 18' 3" (5.56m)
  Drive Hydraulic, top driven
  Articulation 50°
  TUB FEATURES
  Loading Height 9' 6" (2.89m)
  Tub Flare Width 11' 4" (3.45m)
  Depth 50" (127cm)
  Tub Diameter at Base 9' (2.74m)
  Tub Wall Thickness 12 gauge (2.66mm)
  Tub Floor Thickness ¼" (6.35mm)
  Drive Mechanism Electro/hydraulic
  Speed Control Electronic governor
  Service Access Tub opens to 90° to the RHS
  GRAPPLE  
  Reach 29' (8.84m)
  Jaw Reach 8' 4" (2.54m)
  Rotation 270°
     

Illustrations, specifications and descriptions contained herein were accurate at the time of publication, but are subject to change
without notice.
Illustrations may include optional equipment and accessories and may not include all standard equipment.
 

Return to Welmac Haybuster Models                    Visit Haybuster Home Page
 
 

Duratech  -  Haybuster  -  Tub Grinder Hire  -  Stump Grinders  -  Woodchippers  -  Pallet Shredders  -  Used Equipment

News/Shows  -  Home Page
 
© Welmac UK Ltd, 2006 - 2010