Tel: 01400 272475

Mob: 0796 108 9170

Email: welmacuk@btconnect.com

 
 
 
 

[ industrial tub grinder ]

 

 
DURATECH.... Clearing the way for a better tomorrow.
 
The DuraTech Model 2009 Industrial Tub Grinder is efficient and economical for grinding jobs that do not require high horsepower.
It is powered by a 325 horsepower (242.4 kw) Caterpillar electronic diesel engine that meets tier III emission standards and is connected
to the heavy duty mill by a PT-Tech self-adjusting, microprocessor controlled clutch.
Designed and built by DuraTech for those tough grinding jobs at an affordable price.
 
                 
         
                 
 

40" Rotor mounted on 4" shaft with
3" Oil Bath Bearings
20 Fixed or 40 Swinging Hammers
Dynamically Balanced
1" Thick Screens in various sizes.

 

PT-TECH HPTO-12 Clutch
Self Adjusting
Built in Torque Limiter and Brake
Microprocessor Controlled.  Superior
Protection for Engine and Drive Line

 

325 hp C9 Caterpillar
Electronic Diesel Engine
Reliable CAT Service
Meets EPA Tier III standards
Quietest in its class

Rotary Self Cleaning Screen
1800 sq" of Air Passage
Reduces maintenance
Easy Access to Radiator
Allows Flexible Placing of Grinder

                 
                 
       
Command Console with Optional Remote Control
Master Engine Controls, Gauges and Shut-off

Electric over Hydraulic Controls for:
Clutch, Governor and Stacking Conveyor

6 Function Remote Controls:
Engine Stop, Tub Rotation, Stacking Conveyor
and Optional Tub Cover
 
             

Single Drive Orbit Motor
Drives the Tub
Governor Controlled Tub Speed
Heavy Duty 120H Drive Chain
Continuous Sprocket Around Tub

30" Wide Belly Belt
Carries the Finished Product
to the Stacking Conveyor
Impact Resistant Belt

     
                 
         
    24" (60.96 cm) wide top drive 21' 6"
(6.55 m) Stacking Conveyor allows the
operator to load material into a truck or
into a 16' (4.88 m) pile.

The optional Magnetic Roller and
Aluminium Chute removes metal from
the finished product.

 
         
 
 
   
 
     

SPECIFICATIONS

Weight (Pindle Hitch) 20,840 lbs (9542.96 kg)   Tub Floor 1/4" (.635 cm) Thick
Transport Width 8' 6" (2.59 m)   Tub Drive Hydraulic Orbit Motor
Length (Pindle Hitch) 27' 5" (8.36 m)   Discharge Conveyor 21' 6" (6.55 m) Top Drive
Axle 25,000 lbs (11,339 kg) Single Axle     24" (60.96 cm) Wide
Tongue Weight (Pindle Hitch) 6,000 lbs (2,271.55 kg)   Belly Conveyor 30" (76.2 cm) Wide with a V Cleat
Brakes Air   Tub Speed Sensor Electronic Self Governing
Electrical 12 Volt   Safety Switches Safety Shutdown
Tyres (4) 255 x 70R x 22.5   Hammers 20 fixed Single Bolt Hammers
Fuel Capacity 100 Gallons (378.5 ltr)     40 Swinging Hammers
Hydraulic Oil Capacity 50 Gallons (198.3 ltr)   Hammermill Opening 41" x 25" (101.14 cm x 63.5 cm)
Lights Clearance and Directional   Length 40" (101.6 cm)
Engine Caterpillar C9 325 hp (242.4 kw)   Cylinder Plates 16" (40.64 cm) in Diameter
  Tier III Electronic Diesel     1" (3.81 cm) Thick
Clutch PT Tech HPTO-12   Cylinder Shaft 4" (11.43 cm) Stress Proof Steel
Governor Electro-Hydraulic Sensing   Hammermill Drive Direct Drive with Built-In Torque Limiter
Tub Width 9' 6⅜" (2.91 m) at Flare   Bearings 3" (8.89 cm) Pillow Block Bearings
Depth 3' 4" (1.02 m)   Hammer Rods 1" (3.81 cm) Diameter
Tub Diameter at Base 7' 6" (2.27 m)   Screens 1" (2.54 cm) Thick Split Screens
Tub Wall 3/16" (.476 cm) Thick   Transport Ht inc Tub Cover 129.85" (329.82 cm)

Illustrations, specifications and descriptions contained herein were accurate at the time of publication, but are subject to change
without notice.
Illustrations may include optional equipment and accessories and may not include all standard equipment.

 

Return to Welmac Duratech Models                    Visit Duratech Industries Home Page

 

 

Dapper  -  Duratech  -  Caravaggi  -  Haybuster  -  Tub Grinder Hire  -  PTO Tub Grinder  -  Electra

Branch Loggers  -  Stump Grinders  -  Wood Chippers  -  Log Splitters  -  Pallet Shredders

Trommel Screen Hire  -  New Equipment  -  Used Equipment  -  News/Shows  -  Gallery  Home Page

 

Welmac UK Ltd, Main Road, Welbourn, Lincoln, LN5 0QJ.   Tel: 01400 272475    Mob: 0796 108 9170

 
Welmac UK Ltd, 2006 - 2017