Welmac  UK  Ltd
Welbourn
Lincoln,  LN5 0QL
Tel:  01400 272475      Mob:  0796 108 9170
Email:  welmacuk@btconnect.com

 
 
 

[  industrial  tub  grinder  on  tracks  ]
 

 
DURATECH.... Clearing the way for a better tomorrow.
 
The DuraTech 2009 Track tub grinder is built for the customer that wants value as well as a machine that can go into tough terrain.
The CAT 312 track system powered by the CAT C9 325 hp diesel engine will get you to the grinding site and get the job done
economically.
The wireless remote control gives the operator control of the engine stop, rpm, CAT tracks, tub rotation, plus up and down of the
stacking conveyor.
The 2009T meets the needs of land clearing contractors.
 
                     
           
                     
 

CAT 312 Track System
20" (50.8 cm) x 11' 6" (3.5 m)

  

Compact Stacking Conveyor

  

Heavy Duty Hammermill
(fixed hammers shown)

  

Remote Control handles
most grinder functions

  

Enclosed engine comp. with
self-cleaning air intake

  
                     
 
 
     

SPECIFICATIONS
Weight (approx) 30,000 lbs (13,608 kg)   Tub Speed Sensor Electronic Self Governing
Transport Width 8' 6" (2.59 m)   Tub Governor Electro-Hydraulic Sensing
Length 27' 5" (8.36m)   Belly Conveyor 30" (76.2 cm) Wide with a V Cleat
Ground Clearance 11" (27.94 cm)   Stacking Conveyor 11' 6" (3.5 m) L x 24" (60.96 cm) W
Incline Gradient Tracks will climb 40% Incline Gradient     x 8" (20.3 cm) D
Track System 312 CAT Tracks with 500mm   Safety Switches Safety Shutdown
  Shoes 20" (50.8 cm) w x 11' 6" (3.5 m)   Hammermill Opening 41" x 25" (104.14 cm x 63.5 cm)
Clutch PT Tech HPTO-12 Clutch   Rotor Length 40" (101.6 cm)
Electrical 24 Volt   Rotor Plates 16" (40.64 cm) in Diameter
Fuel Capacity 100 Gallons (378.5 ltr)     1" (2.54 cm) Thick
Hydraulic Oil Capacity 50 Gallons (189.3 ltr)   Hammer Rods 1½" (3.43 cm) Diameter
Tub Width 9' 6⅜" (2.91 m) at Flare   Rotor Shaft Diameter 6" (15.24 cm) Stress Proof Steel
Tub Depth 40" (1.02 m)   Bearings 3½" (8.89 cm) Pillow Block Bearings
Tub Diameter at Base 7' 6" (2.27 m)   Hammers 20 Fixed Single Bolt or
Tub Wall 3/16" (.476 cm) Thick     40 Swinging Hammers
Tub Floor 1/4" (.635 cm) Thick   Hammermill Drive Direct Drive through HPTO Clutch
Tub Drive Hydraulic Orbit Motor   Screens 1" (2.54 cm) Thick Split Screens

Illustrations, specifications and descriptions contained herein were accurate at the time of publication, but are subject to change
without notice.
Illustrations may include optional equipment and accessories and may not include all standard equipment.
 

Return to Welmac Duratech Models                    Visit Duratech Industries Home Page
 

 

Duratech  -  Tub Grinder Hire  -  Stump Grinders  -  Woodchippers  -  D5600 Shredder  -  Used Equipment  -  News/Shows  -  Home
 
© Welmac UK Ltd, 2006 - 2008