Welmac UK Ltd: Haybuster Main Dealer

Duratech

Haybuster

Tub Grinder Hire

Stump Grinders

Woodchippers

Pallet Shredders

Used Equipment

News / Shows

Home Page

Welmac UK Ltd

Welbourn

Lincoln, LN5 0QL

Tel: 01400 272475 Mob: 0796 108 9170

Email: welmacuk@btconnect.com

2800 BALEBUSTER

[ all bale processor ]

PROCESSES LARGE SQUARE OR ROUND BALES

   Right hand discharge
       Two stage hydraulic deflector
           Heavy duty fixed chamber
               Variable speed live floor with 3 chain slat conveyor
                   Heavy duty conveyor frame
                       Oil bath chain case with double 60 roller chain reverses direction and increases rotor speed
                           Heavy duty 9' x 26" rotor with 40 3lb flails
                               Rotor access door for easy maintanance
                                   Dual action loading arms lay round and square bales in the chamber with ease
                                       Single hydraulic remote-controls entire unit
                                           Hydraulic slug bar adjustment
                                               Common bearings and chains with twine protection
                                                   90 to 200 hp tractor

BALE SHREDDER CHAMBER
Max Bale Size	6' long x 6' 6" dia (1.83 x 1.98m)
Max Bale Weight	2200 lbs (1000kg) each
Rotor Length	108" (2.74m)
Rotor Diameter	26" (66cm), flails extended
Rotor Bearing	Ball, 1¾" (4.44cm)
Number of Flails	40
Flail Type	HD 7/16" thick (11.11cm), 3 lbs (1.36kg) heat treated spring steel
Number of Slug Bars	7
Slug Bar	Hydraulically adjusted, infinite settings
Delivery	Right hand discharge
Deflector	Split, hydraulic, infinite settings, 120°
Max Horizontal Spread	Straw up to 50ft (15.24m)
BALE LOADER
Type	Twin boom arms, squeeze arms for square bales
Bale Tines	Tubular steel, 10° float, 4 pos. width
BALE CONVEYOR
Type	3 roller chains with cross slats
Drive	Hydraulic orbital motor
CHAIN CASE
Sealed oil lube chain case reverses rotation and increases rotor speed. Double 60 roller chain.
OPERATOR CONTROLS
Loader, Conveyor, Deflector, Squeeze Ldr	1 remote with electric over hydraulic finger tip controls
Bale Conveyor Speed	Speed control valve
Bale Conveyor Adj	Hand lever, 5 settings, optional hyd adj
Deflector	Hyd. with split deflector, can be offset

WEIGHT
Total	7300 lbs (3311 kg)
Tongue	2550 lbs (1156 kg), bale loader raised
Tonge	2150 lbs (975 kg), bale loader down
TRANSPORT DIMENSIONS (bale ldr raised, deflector folded)
Width	101" (2.56m)
Length	211" (5.33m)
Height	102" (2.59m)
WORKING DIMENSIONS (1 bale, deflector in spread pos.)
Width	130" (3.3m)
Length	290" (5.35m)
Height	120" (3.05m)
WORKING DIMENSIONS (2 bales, deflector in spread pos.)
Width	130" (3.3m)
Length	329" (8.35m)
Height	120" (3.05m)
CHASSIS FEATURES
Towing Arrangements	Clevis type hitch
Jack Capacity	7000 lbs (3175.2 kg)
Jack Travel	10" (25.4cm)
Tyres (2 off)	16.5 x 16.1 - 10 ply
Wheels (2 off)	16.1X 12 - 8 bolt drop centre
Bearing Type	Tapered roller
TRACTOR REQUIREMENTS
PTO	90 to 155hp, 1000 RPM, 1⅜" shaft
Min Hydraulic Output	8 gpm at 2000 psi
Hydraulic Controls	1 double-acting control, quick coupler
Tractor Weight	=> 2800 with 2 bales




The 2800 features an oil bath case with double 60-roller chain that reverses the direction of the PTO and increases the speed and efficiency of the rotor.	The heavy duty 9' x 26" rotor with 40 3lb flails processes both dry hay and silage bales.	Rotor access doors, giving you quick and easy access to the rotor for routine inspections and twine removal.



The heavy duty fixed shredder chamber with 3 chain slat conveyor will process bales in any condition....wet, frozen, old, new or with flat bottoms.			The hydraulically adjustable slug bar allows the operator to adjust the length of the cut, even with a bale in the chamber.