Welmac UK Ltd: DuraTech Main Dealer - 3010 Industrial Tub Grinder

Duratech

Tub Grinder Hire

Stump Grinders

Woodchippers

D5600 Shredder

Used Equipment

News / Shows

Home Page

Welmac UK Ltd

Welbourn

Lincoln, LN5 0QL

Tel: 01400 272475 Mob: 0796 108 9170

Email: welmacuk@btconnect.com

[ industrial tub grinder ]

DURATECH.... Clearing the way for a better tomorrow.

The DuraTech Model 3010 Industrial Tub Grinder has it ALL.

From the 30" (76.2 cm) wide oscillating stacking conveyor to the self-cleaning radiator screen, this machine is WHAT OUR
CUSTOMERS HAVE ASKED FOR!

Powered by a CAT C15 475 hp (354.21 kw) or 540 HP (402.68 kw) electronic Tier III diesel engine, with a PT Tech Fluid Clutch
system that drives a heavy duty hammermill, this makes the 3010 one of the most efficient and productive grinders on the market.




44" Rotor mounted on 6" shaft with 4" Oil Bath Bearings 20 Fixed or 40 Swinging Hammers 8 1½" (3.81 cm) Hammer Rods 1" Thick Screens in various sizes.	HPTO Oil Cooled Clutch Self Adjusting Continuous Lubrication Built-in Torque Limiter and Brake Microprocessor Controlled	Single Drive Orbit Motor Heavy Duty 120H Chain 8* Heavy Duty Tub Channel Continuous Sprocket Around Tub Dual Spring Adj Chain Tension	30" (76.2 cm) Wide Laceless Belly Belt Impact Resistant Vulcanised Belt


		Command Console with Optional Remote Control Master Engine Controls, Gauges and Shut-off Electric over Hydraulic Controls for: Clutch, Governor and Stacking Conveyor 6 Function Remote Controls: Engine Stop, Tub Rotation, Stacking Conveyor and Optional Tub Cover

30" Wide x 26' Stacking Conveyor 18' (5.48 m) Stacking Height Optional Magnetic Roller and Aluminium Chute 50 Degree Oscillation	Rotary Self Cleaning Screen 1800 sq" of Air Passage Constant Clean Air to Radiator and Engine Easy Access for Servicing

Weight with Pintle Hitch	35,840 lbs (16,256.75 kg)	Tub Wall	1/4" (.635 cm) Thick
Tongue Wt on Pintle Hitch	5,840 lbs (2.654.5 kg)	Tub Floor	3/8" (.953 cm) Thick
Wt with 5th Wheel Hitch	38,000 lbs (17,236.51 kg)	Tub Drive	120H Chain
Transport Width	8' 6" (2.54 m)		Single Drive Hydraulic Motor
Transport Height	11' (3.35 m)	Service Access	90 Degree Tilting Tub
T. Length w Pintle Hitch	38' 4" (11.68 m)	Discharge Conveyor	26' (7.92 m) Long x
T. Length w 5th Wheel H.	42' 11¾" (13.1 m)		30" (76.2 cm) Wide Folding
Axle	(2) 22,500 lbs (10,205.82 kg)	Belly Conveyor	30" (76.2 cm) Wide Impact Resistant
Electrical	24 Volt	Tub Speed Sensor	Electronic Self Governing
Lights	Clearance, Directional	Rotor Shaft Diameter	6" (15.24 cm) Stress Proof Steel
Tyres	255/70Rx22.5	Rotor Length	44" (111.76 cm)
Engine	475 hp (354.21 kw) or 540 hp	Rotor Plates	16" (40.64 cm) Diameter x
	(402.68 kw), CAT C15 893 cu. inch		1½" (3.81 cm) Thick
Fuel Capacity (5th Wheel)	300 Gallons (1,135.6 ltr)	Hammers	20 Fixed Single Bolt or 40 Swinging
Fuel Capacity - Pintle H.	180 Gallons (681.37 ltr)	Feed Opening	45" x 25" (114.3 cm x 63.5 cm)
Hydraulic Oil Capacity	50 Gallons (189.3 ltr)	Screen Area	2403 Square Inches (6103.6 sq cm)
Tub Width	10' (3.04 m)	Hammer Rods	(8) - 1½" (3.81 cm) Diameter
Tub Depth	46" (116.84 cm)	Bearings	4" (10.16 cm) Oil Bath Bearings
Tub Diameter at Base	8' (2.43 m)	Hammermill Drive	Direct Drive Through
Transport Ht w Tub Cover	135.82" (345.01 cm)		HPTO Oil Cooled Clutch

Illustrations, specifications and descriptions contained herein were accurate at the time of publication, but are subject to change
without notice.
Illustrations may include optional equipment and accessories and may not include all standard equipment.


			Enclosed Engine Compartment Quietens and Protects the Engine from Dust and Debris Build-up. The optional Hydraulic Tub Cover Controls Flying Debris.