Welmac  UK  Ltd
Welbourn
Lincoln,  LN5 0QL
Tel:  01400 272475      Mob:  0796 108 9170
Email:  welmacuk@btconnect.com

 
   
 

[  industrial  tub  grinder  with  grapple  loader  ]
 

 
DURATECH.... Clearing the way for a better tomorrow.
 
The DuraTech 3010FL Industrial Tub Grinder with Grapple Loader really has what our customers have been asking for.
It includes the following features; 7000 series loader with continuous rotating grapple, self-cleaning radiator screen, CAT C15 540 hp
(402.68 kw) Tier III diesel engine coupled with a HPTO fluid clutch to the heavy duty hammermill and an oscillating stacking conveyor.
This is a tub grinder that can handle the toughest  grinding jobs.
 
Features Include:
  • Caterpillar C15 540 hp (402.68 kw) Tier III electronic diesel engine.
  • PT-Tech HPTO 15 wet clutch.
  • Efficient one man operation.
  • 7000 series grapple loader:
  •         Joystick operator controls.
  •         25' (7.62 m) boom length.
  •         Secondary controls and gauges in cab.
  •         Cab hydraulic raises 4' (1.22 m).
  •         Continuous rotating grapple.
  • 50 degree side to side oscillating stacking conveyor.
  • Self cleaning radiator screen.
  • Enclosed engine compartment reduces noise levels.
  • Impact resistant laceless belly belt.
                 
       
 
All function controls at the finger tips of the operator
     
 
The HPTO wet clutch powers the Heavy Duty Mill
with fixed hammers
 
               
 

Cab raises 4' for
unobstructed view
of loading

  

25' boom, continuous
rotating grapple

  

Easy to operate
joystick controls

    
               
                 
 
 
   
 
     

SPECIFICATIONS
Weight 51,540 lbs (23,378.15 kg)   Tub Floor 3/8" (.95 cm) Thick
Hitch Weight 13,200 lbs (5,987.42 kg)   Tub Drive Direct Hydraulic Drive
Transport Width 10' (3.05 m)   Service Access 90 Degree Tilting Tub
Transport Height 13' 4" (4.06 m)   Stacking Conveyor 26' L x 30" W x 8" D
Transport Length 43' 9" (13.34 m)     (7.92 m L x 76.2 cm W x 20.3 cm D)
Axles (3) 22,500 lbs (10,208.83 kg)   Belly Conveyor 30" (76.2 cm) Wide
Electrical 24 Volt System   Tub Speed Sensor Electronic Self Governing
Tyres (12) - 255 X70R X 22.5   Rotor Shaft Diameter 6" (15.24 cm) Stress Proof Steel
Engine 540 hp (402.68 kw) CAT C15 Tier III   Rotor Length 44" (111.76 cm)
Clutch HPTO 14 Wet Clutch   Rotor Plates 16" (40.64 cm) Diameter
Fuel Capacity 300 Gallons (U.S.) (1135 ltr)     1½" (3.81 cm) Thick Plates
Hydraulic Oil Capacity 110 Gallons (U.S.) (416.6 ltr)   Feed Opening 25" (63.5 cm) x 45" (114.3 cm)
Lights Clearance, Directional & Tail   Screen Area 2403 square inches (5189.2 sq cm)
Tub Width 10' (3.05 m)   Hammer Rods 1½" (3.81 cm) D x 43" (109.22 cm) L
Tub Depth 46" (116.8 cm)   Bearings 4" (10.16 cm) Pillow Block Bearings
Tub Diameter at Base 8' (2.44 m)   Hammermill Drive Direct Through HPTO Wet Clutch
Tub Wall 1/4" (.64cm) Thick   Screens Split Screens 1" (2.54 cm) Thick

Illustrations, specifications and descriptions contained herein were accurate at the time of publication, but are subject to change
without notice.
Illustrations may include optional equipment and accessories and may not include all standard equipment.
 

Return to Welmac Duratech Models                    Visit Duratech Industries Home Page
 

 

Duratech  -  Tub Grinder Hire  -  Stump Grinders  -  Woodchippers  -  D5600 Shredder  -  Used Equipment  -  News/Shows  -  Home
 
© Welmac UK Ltd, 2006 - 2008