Welmac  UK  Ltd
Welbourn
Lincoln,  LN5 0QL
Tel:  01400 272475      Mob:  0796 108 9170
Email:  welmacuk@btconnect.com

 
 
 

[  industrial  tub  grinder  on  tracks  ]
 

 
DURATECH.... Clearing the way for a better tomorrow.
 
The DuraTech 3010 Track tub grinder is designed for the customer that needs to get into tough terrain.
With the 20" x 15' CAT track system this grinder can get to the job, no matter what the conditions.
The Remote Control gives the operator control of the CAT diesel engine, as well as the CAT tracks, tub direction and stacking conveyor.
The 3010T meets the need of today's land clearing contractors.
 
Features Include:
  • 20" (50.8 cm) wide x 15' (4.57 m) long steel Caterpillar 320L track system.
  • Caterpillar C15 475 hp (354.21 kw) or 540 hp (402.68 kw) Tier III electronic diesel engine.
  • PT-Tech HPTO 14wet clutch.
  • Remote control handles most functions  of the machine.
  • Self cleaning radiator screen.
  • Enclosed engine compartment reduces noise levels.
  • Impact resistant laceless belly belts.
                 
         
               
 

CAT 20" x 15' 320L
Track System

  

Compact Stacking Conveyor

Remote Control handles most
of the functions of the grinder

  
               
                 
         

Self-cleaning radiator
system

  
                 
 

The HPTO wet clutch powers the Heavy Duty Mill with fixed hammers

          
                 
 
 
   
     

SPECIFICATIONS
Weight 44,620 lbs (20,239.3 kg)   Tub Floor 3/8" (.95 cm) Thick
Transport Width 8' 6" (2.59 m)   Tub Drive Direct Hydraulic Drive
Transport Height 11' 4" (3.45 m)   Service Access 90 Degree Tilting Tub
Transport Length 36' 3" (11.07 m)   Stacking Conveyor 10' 6" L x 30" W x 8" D
Ground Clearance 13¼" (33.8 cm)     (3.2m L x 76.2 cm W x 20.3 cm D)
Incline Gradient Tracks will climb 50% Incline Gradient   Belly Conveyor 30" (76.2 cm) Wide
Track System 20" (50.8 cm) wide x 15' (4.6 m) long   Tub Speed Sensor Electronic Self Governing
  Steel Track   Rotor Shaft Diameter 6" (15.24 cm) Stress Proof Steel
Electrical 24 Volt   Rotor Length 44" (111.76 cm)
Engine 475 hp (354.21 kw) CAT C15 Tier III or   Rotor Plates 16" (40.64 cm) Diameter
  540 hp (402.68 kw) CAT C15 Tier III     1½" (3.81 cm) Thick Plates
Clutch HPTO 14 Wet Clutch   Feed Opening 25" (63.5 cm) x 45" (114.3 cm)
Fuel Capacity 160 Gallons (605.6 ltr)   Screen Area 2403 sq in (5189.2 sq cm)
Hydraulic Oil Capacity 50 Gallons (U.S.) (189.3 ltr)   Hammer Rods 1½" (3.81 cm) Diameter
Tub Width 10' (3.05 m)     43" (109.22 cm) Long
Tub Depth 46" (116.8 cm)   Bearings 4" (10.16 cm) Pillow Block Bearings
Tub Diameter at Base 8' (2.44 m)   Hammermill Drive Direct Through HPTO Oil Cooled
Tub Wall 1/4" (.64 cm) Thick   Screens Split Screens 1" (2.54 cm) Thick

Illustrations, specifications and descriptions contained herein were accurate at the time of publication, but are subject to change
without notice.
Illustrations may include optional equipment and accessories and may not include all standard equipment.
 

Return to Welmac Duratech Models                    Visit Duratech Industries Home Page
 

 

Duratech  -  Tub Grinder Hire  -  Stump Grinders  -  Woodchippers  -  D5600 Shredder  -  Used Equipment  -  News/Shows  -  Home
 
© Welmac UK Ltd, 2006 - 2008