Tel: 01400 272475

Mob: 0796 108 9170

Email: welmacuk@btconnect.com

 
 
 
 
[  horizontal  grinder  ]
 

 
DURATECH.... Clearing the way for a better tomorrow.
 
Meet the newest addition to the DuraTech family of grinders, the Model 5064 Horizontal. This Heavy Duty midsized grinder is available in a trailer model or mounted on tracks. It is available with your choice of CAT Tier III engines to meet your grinding needs. Choose from 475 HP (354 kw), 540 HP (403 kw), or 630 HP (470 kw), all with HPTO 14 TD wet clutch for your specific requirements of productivity and efficiency.
The large 61.5" (156.2cm) x 35" (88.9cm) feed opening allows material to flow to the 64" (162.5cm) wide 8,850 lb (3878 kg) hammermill for superb grinding performance. The programmable logic speed control (PLC) governs the product flow through the 13' 2" (4.01m) 197 cubic foot (5.59 cubic metre) feed hopper for maximum grinding efficiencies. The optional remote control allows the operator to have complete control of the grinder while operating support equipment.
If you want a horizontal grinder that will give you maximum return on your investment, check out the DuraTech 5064 Horizontal Grinder. Contact us for a demonstration at your location.
 
                         
             
                         
  Self-cleaning air
intake system
  Self governing apron
and feed roller
  Oscillating stacking
conveyor pivots 40
  4 groove belt
drive system
  Hammermill with
32 hammers
  HPTO
wet clutch
 
                         
 
 
 

Click on image above for larger version (back browser to return)

SPECIFICATIONS   model 5064  (horizontal grinder)
 Engine Caterpillar C18 Tier lII 630 hp (470 kw)    Feed Opening W x H 61" (156.2 cm) x 35" (88.9 cm)
  Diesel Engine    Hopper Loading Height 96" (234.84cm)
  Caterpillar C15 Tier lII 540 hp (403 kw)    Feed Roller Diameter 36" (91.44cm)
  Diesel Engine    Discharge Conveyor L x W 26' (7.95m) x 48" (121.92cm)
  Caterpillar C15 Tier lII 475 hp (354 kw)    Belly Conveyor W x L 54" (137.16 cm) x 22' (6.71 m)
  Diesel Engine    Load Speed Sensor Programmable Logic Controller
 LogicClutch HPTO 14 TD Wet Clutch    Rotor Bearing Diameter 4 7/16" (13.81cm)
 Weight 70,560 lbs (32,005.5 kg)    Rotor Shaft 7" (17.78 cm) Alloy Steel
 5th Wheel Weight 21,880 lbs (9,924.6 kg)    Rotor Width 64" (162.56 cm)
 Transport Width 8' 4" (2.54 m)    Rotor Plates 32" (81.926 cm) Diameter x 1"
 Transport Height 13' 1" (3.99 m)     (3.81 cm) Thick
 Transport Length 39' 5" (12.01 m)    Screen Area 3705 sq inches (2.39 sq metres)
 Axles (3) 22,500 lbs (9,979.03 kg)    Hammers 32 single bolt hammers
 Axle Spacing 49" (124 cm)    Hammermill Weight 8,550 lbs (3878 kg)
 Axle Weight Total 48,680 lbs (22,080.9 kg)    Number of Hammers 32 Single Bolt
 Electrical 24 Volt    Hammer Rods (16) 2" (5.08cm) Diameter
 Tyres (6) 445/50R22.5 super single    Hammer Tip Swing 41" (104.14 cm)
 Fuel Capacity 300 Gallons (1135 ltr)    Hammermill Drive HPTO 14 TD Wet Clutch Driving 4
 Hydraulic Oil Capacity 145 Gallons (549 ltr)     Groove Belt to Mill
 Lights Clearance, Directional    Hydraulic Jacks Trailer Standard Equipment
 Hopper Width 61" (156.7 cm) Bottom     Track machine
  74" (187.96 cm) Top    Tracks CAT Track System
 Hopper Length 13' 2" (4.01 m)      
 Depth 35" (89.9 cm)      
 Hopper Capacity 197 Cubic Feet (5.59 Cubic Metres)      
 

Illustrations, specifications and descriptions contained herein were accurate at the time of publication, but are subject to change
without notice.
Illustrations may include optional equipment and accessories and may not include all standard equipment.

 

Return to Welmac Duratech Models                    Visit Duratech Industries Home Page

 

 

Dapper  -  Duratech  -  Caravaggi  -  Haybuster  -  Tub Grinder Hire  -  PTO Tub Grinder  -  Electra

Branch Loggers  -  Stump Grinders  -  Wood Chippers  -  Log Splitters  -  Pallet Shredders

Trommel Screen Hire  -  New Equipment  -  Used Equipment  -  News/Shows  -  Gallery  Home Page

 

Welmac UK Ltd, Main Road, Welbourn, Lincoln, LN5 0QJ.   Tel: 01400 272475    Mob: 0796 108 9170

 
Welmac UK Ltd, 2006 - 2017