Welmac UK Ltd: Haybuster Main Dealer - CMF-425 Vertical Mixer

Duratech

Haybuster

Tub Grinder Hire

Stump Grinders

Woodchippers

Pallet Shredders

Used Equipment

News / Shows

Home Page

Welmac UK Ltd

Welbourn

Lincoln, LN5 0QL

Tel: 01400 272475 Mob: 0796 108 9170

Email: welmacuk@btconnect.com

CMF-425

[ vertical mixer ]

At Haybuster, we put 40 years of hay and feed processing experience into our Cutter-Mixer-Feeders (CMFs). Our engineers with farm
and cattle backgrounds designed them with input from dairy and beef growers throughout North America. Haybuster products are built
with attention to durability, versatility and reliability. Compare our equipment to our competition and you will see the difference. Our
CMFs are built heavier and stronger for long service life.

Features
Heavy-duty construction
Twin vertical augers with 5/8" flighting
Free-motion clutches on drive lines
Optional two speed gearbox
Heavy-duty planetary drives
Front centre unloading
Optional hydraulic chain slat discharge conveyor extensions
(left, right or dual)

Optional rigid discharge spouts (left, right or dual)
Optional magnets on discharge spouts
Optional rear light kit
Four-Point Digi-Star Scale
12" rubber extension
Two observation windows
Tapered boil ring




Heavy duty 66" twin screw augers with self-sharpening serrated knives driven by 2 HD ASU gearboxes that are covered by a 2-year warranty.	36" wide hydraulic chain/slat unloading conveyor. Left, right or dual discharge options. 18-5/8" to 47" discharge height.	Optional magnets on the discharge chutes remove metal such as bale wire from feed, providing the highest quality feed available.



The Tapered Boil Ring is standard equipment and prevents product from boiling over the sides during the cutting and mixing process.	The CMF-425 has observation windows on the right and left sides of the machine.	Heavy duty Rigid Tandem Axles on each side with 4 - 12.5L - 15FL 12 ply tyres on 8 hole rims with heavy duty tapered beam hubs.



4 point scale for accurate weighing with reduced scale bounce during loading and feeding.	EZ 2000 monitor for 4 point scale. Other Digi-Star monitor options are available. It is powered by an onboard 12V battery.	Comes with either a heavy duty constant velocity PTO or an optional 2-speed gearbox for startups and heavy rations.

CAPACITIES
Mixing w/o extensions	425 cu ft (12.03 cu m)
Mixing w/12" extension	525 cu ft (14.87 cu m)
Gross weight capacity	28,500 lbs (12,92 kg)
Tare Weight-TMR	13,500 lbs (6123.5 kg)
AUGERS
Number	2
Diameter	66" (162.56cm)
Flighting thickness	⅝" (1.59cm)
No./thickness knives	14 ¼" (.635cm) self-sharpening
SIZES
Door Opening	24" x 42" (60.96 x 106.68cm)
Floor Thickness	⅝" (1.58cm)
Sidewall Thickness	¼" (.635cm)
DRIVE LINE AND GEAR BOXES
PTO	1⅜" (3.49cm) 1000 RPM
Option	2-speed gear box
Protection	Free motion automatic clutches
UNLOADING CONVEYOR
Type	36" (91.44cm) chain
Discharge Height	18⅝" to 47" (47.3 to 119.4cm )
Drive	Hydraulic orbital motor
Discharge Options	Left, right or both
OPTIONS
Discharge magnets on conveyor, Rear discharge door, 2 speed gear boxes

WEIGHT
Total	15,000 lbs (6803.9kg) w. 2 conveyors
Tongue Weight	1800 lbs (816.5kg)
TRANSPORT DIMENSIONS (fully raised conveyor)
Width	9' 11" (3.03m)
Length	21' (6.40m)
Height	9' 2¼" (2.80m)
WORKING DIMENSIONS
Width	8' 7¼" (2.64m)
Loading Height	9' 2¼" (2.80cm) w/rubber extension
CHASSIS
Towing Arrangement	Clevis type hitch
Tyres (4 off)	12.5L-15FI 12 ply
Wheels (4 offf)	8 hole
Axle	Rigid
Bearings	Tapered roller
Jack Capacity	7000 lbs (3175.2 kg) 10" travel
Extensions	12" rubber
TRACTOR REQUIREMENTS
PTO	1000 RPM, 1⅜" shaft
PTO Power	110 min, 140-150 hp recommended
Hydraulic Output	8 gpm at 1500 psi
Electrical	12VDC (Battery included)

Illustrations, specifications and descriptions contained herein were accurate at the time of publication, but are subject to change
without notice.
Illustrations may include optional equipment and accessories and may not include all standard equipment.



The 425 cu ft capacity is increased to 525 cu ft with the standard 12" extension.	Adjustable vertical knives for more aggressive cutting.	Large 24" by 42" unloading door for fast, even unloading and cleaning.