Tel: 01400 272475

Mob: 0796 108 9170


[ vertical mixer ]
At Haybuster, we put 40 years of hay and feed processing experience into our Cutter-Mixer-Feeders (CMFs). Our engineers with farm and cattle backgrounds designed them with input from dairy and beef growers throughout North America. Haybuster products are built with attention to durability, versatility and reliability. Compare our equipment to our competition and you will see the difference. Our CMFs are built heavier and stronger for long service life.
Heavy-duty construction
Twin vertical augers with 5/8" flighting
Free-motion clutches on drive lines
Optional two speed gearbox
Heavy-duty planetary drives
Front centre unloading
Optional hydraulic chain slat discharge conveyor extensions
(left, right or dual)

Optional rigid discharge spouts (left, right or dual)
Optional magnets on discharge spouts
Optional rear light kit
Four-Point Digi-Star Scale
12" rubber extension
Two observation windows
Tapered boil ring

Free motion clutches on the driveline
protect the heavy duty gearbox. An
optional two speed gearbox is available
for loaded startups and heavy rations.
Heavy duty 88" twin screw augers
with self-sharpening serrated knives
driven by 2 HD USA gearboxes
covered by a two year warranty.
A DigiStar 4pt scale and EZ 3500 V
monitor are standard equipment.
Other units available. Powered by
onboard 12 volt battery.
700 cu ft capacity increased to
830 cu ft with standard 12" extension.
The CMF-700 has observation
windows on the right and left
sides of the machine.
The optional fender (mudguard)
kit is available for transporting
the CMF-700 on public roads.



  Mixing w/o extensions 705 cu ft (19.95 cu m)
  Mixing w/12" extension 858 cu ft (24.28 cu m)
  Gross weight capacity 39,000 lbs (17,69 kg)
  Tare Weight-TMR 21,550 lbs (9774.9 kg)
  Number 2
  Diameter 88" (282.52cm)
  Flighting thickness ⅝" (1.59cm)
  No./thickness knives 16  " (.635cm) self-sharpening
  Door Opening 24" x 42" (60.96 x 106.68cm)
  Floor Thickness ⅝" (1.58cm)
  Sidewall Thickness " (.635cm)
  PTO 1" (4.45cm) 1000 RPM
  Gear Boxes 2-speed, 100HP
  Protection Free motion automatic clutches
  Type 36" (91.44cm) chain
  Discharge Height 26⅝" to 55" (67.63 to 139.7cm )
  Drive Hydraulic orbital motor
  Discharge Options Left, right or dual
  Discharge magnets on conveyor, Rear discharge door,
  2 speed gear boxes
  Total 17,400 lbs (7915.2kg) empty
  Tongue Weight 1775 lbs (805.1kg)
  TRANSPORT DIMENSIONS (fully raised conveyor)
  Width 9' 11" (303cm)
  Length 24' 6" (747cm)
  Height 10' 1" (307cm) w/rubber extension
  Height 9' 4" (286cm) w/o rubber extension
  Width 11' 11" (3.63m) conveyor at 45 angle
  Loading Height 9' 5" (2.86cm) w/o rubber extension
  Loading Height 10' 1" (286cm) w/ rubber extension
  Towing Arrangement Clevis type hitch
  Tyres (4 off) 315/80R22.5 20 ply
  Wheels (4 offf) 10 hole
  Axle Rigid
  Bearings Tapered roller
  Jack Capacity 7000 lbs (3175.2 kg) 10" travel
  PTO 1000 RPM, 1" shaft
  PTO Power 135 HP minimum
  Hydraulic Output 8 gpm at 1500 psi

Illustrations, specifications and descriptions contained herein were accurate at the time of publication, but are subject to change
without notice.
Illustrations may include optional equipment and accessories and may not include all standard equipment.


Return to Welmac Haybuster Models                    Visit Haybuster Home Page



Red Dragon  -  Duratech  -  Caravaggi  -  Haybuster  -  Tub Grinder Hire  -  PTO Tub Grinder  -  Electra

Branch Loggers  -  Stump Grinders  -  Wood Chippers  -  Log Splitters  -  Pallet Shredders

Trommel Screen Hire  -  New Equipment  -  Used Equipment  -  News/Shows  -  Gallery  Home Page


Welmac UK Ltd, Main Road, Welbourn, Lincoln, LN5 0QJ.   Tel: 01400 272475    Mob: 0796 108 9170

Welmac UK Ltd, 2006 - 2018