Tel: 01400 272475

Mob: 0796 108 9170

Email: welmacuk@btconnect.com

 
 
H-1000 SERIES II
[ tub grinder ]
 
 
Grinds hay - big round bales, loose hay, small and large square bales
     Grinds crop residues - straw, stover and other types
          Grinds grain - corn (ear or shelled and high moisture), sorghum and all cereal grains
               High capacity in portable packaging
                    Electronic governor
                         Works with 80 to 175 PTO horsepower tractors
 

         
   

The BIG BITE hammer mill is 44" long
and at operating speed the 64 swinging
hammers
on 8 heavy duty hammer rods
extend to 26" in diameter. A "hay spike"
improves mill feeding and heavy duty "slug
busters"
enhance the hammer's action.

 

A dependable eight belt drive
system
routes power from the
tractor's PTO and supplies it to
the mill, turning it at approx. twice
the PTO speed, for smooth feeding
 and high capacity grinding.

 

The "BIG BITE" tub is driven by a
hydraulic motor
through a heavy-duty
roller chain. This drive method provides
for a responsive and smooth transmission
of power to the tub.

         
   
Two heavy-duty and high capacity
augers mounted in the belly pan
convey the produce to the discharge
conveyor for high speed transfer
and a leak-free environment.
  The tub rotation is controlled by the
DuraTech electronic governer.
This allows the engine speed to
remain constant as the tub rotation
speed varies, to control the feed rate
to the hammer mill.
  The product is taken away from the
belly pan augers with an 18" wide by
20' long high capacity discharge
conveyor
. The conveyor height is
 hydraulically controlled, with a
strong steel linkage system.
         

     
 
     

SPECIFICATIONS

     
  HAMMERMILL
  Length 44" (113.03cm)
  Diameter 26" (66.04cm) with hammers ext'd
  Feed Opening 27" x 45" (68.6 x 114.3cm)
  Hammers ⅜" (.952cm) hardened swing
  Number of Hammers 64
  Rods 15  16" (2.38cm) case hardened
  Mill Plates 3/16" thick x 15" dia (.476 x 40cm)
  Mill Shaft 3" (7.62cm) stress proof steel
  Drive End Bearing 2" (6.94cm) pillow block
  Idle End Bearing 2 7/16" (6.19cm) pillow block
  Screens " thick, holes from ⅛" to 4" (.31 - 10)
  Screen Area 2400 sq in (609654 sq cm)
  Drive PTO through multiple vee belts
  Tractor PTO 1000 RPM, 1⅜"(3.49cm) dia shaft
  Recommended PTO 80 to 175 Horsepower
  TUB FEATURES
  Loading Height 7' 11" (2.41m)
  Tub Width at Flare 10' 3" (3.12m)
  Depth 44" (113.03cm)
  Tub Inside Dia at Base 8' (2.44m)
  Tub Wall Thickness 14 gauge (1.89mm)
  Tub Floor Thickness 10 gauge (3.42mm)
  Drive Mechanism Electro/hydrostatic
  Speed Control Electronic governor
  Hydraulic Oil Capacity 12 gal (45.42 ltr)
  BELLY PAN AUGERS
  Type Double free floating augers
  Auger Size 9" x 96" (22.86 x 243.84cm)
  Width 33" (85.73cm)
  Drive Mechanical
 
  DISCHARGE CONVEYOR
  Type Rubber belt with cleats
  Rollers "Easy Clean Roller"
  Drive Mechanical
  Length 20' long (6.09m)
  Width 18" (45.72cm)
  Max Lift Height 13' 9" (4.19cm)
  Conveyor Lift Hydraulic
  Conveyor Lift Cylinder 3" x 8" (8.89 x 20.32cm)
  Conveyor Fold Spring assist manual fold
  OPERATOR CONTROLS
  Tub Rotation 3 position hydraulic valve: clockwise,
stop, anticlockwise
  Tub Speed DuraTech RCB93 Electronic Governor
  Conveyor Lift 3 position hydraulic valve: raise, hold,
lower
  WEIGHT
  Total 6400 lbs (2903kg)
  TRANSPORTATION DIMENSIONS
  Width 10' 3" (3.12m)
  Length 21' 4" (6.50m)
  Height 10' 2" (3.09m)
  CHASSIS FEATURES
  Towing Arrangement Clevis type for hitch pin
  Tyres Two 9.5 x 14 (24.13 x 35.56cm)
  Wheels Drop centre rims
  Bearings Tapered Roller Bearings
  OPTIONS
  Loose Hay Guide, Grain Grinding Hopper, Ear Corn Kit, Geyser
  Plate, Mill Grate, Screen Sizes from ⅛" to 4" Round Hole,
  Road Tyres.
     

Illustrations, specifications and descriptions contained herein were accurate at the time of publication, but are subject to change
without notice.
Illustrations may include optional equipment and accessories and may not include all standard equipment.

 

Return to Welmac Haybuster Models                    Visit Haybuster Home Page

 

 

Dapper  -  Duratech  -  Caravaggi  -  Haybuster  -  Tub Grinder Hire  -  PTO Tub Grinder  -  Electra

Branch Loggers  -  Stump Grinders  -  Wood Chippers  -  Log Splitters  -  Pallet Shredders

Trommel Screen Hire  -  New Equipment  -  Used Equipment  -  News/Shows  -  Gallery  Home Page

 

Welmac UK Ltd, Main Road, Welbourn, Lincoln, LN5 0QJ.   Tel: 01400 272475    Mob: 0796 108 9170

 
Welmac UK Ltd, 2006 - 2017